• Products
  • /
  • PURECYCLE

PureCycle 280 ORC module

PureCycle 280 by TICA is a 280 kWe plug and play compact ORC module that can be efficiently employed for waste heat recovery and power generation using renewables from low-grade temperature resources ranging from 90°C to 150°C. 

The system is supplied on modular mounted packages, and can be sized to match resource conditions and rapidly deployed according to need.

I want more info
|
TICA PureCycle ORC industrial application

PRODUCE CLEAN AND AFFORDABLE ELECTRICITY FROM LOW TEMPERATURE HEAT SOURCES WITH PURECYCLE 280.

The main components of PureCycle ORC power systems include:

1

THE TURBINE GENERATOR ASSEMBLY

This is the heart of the PureCycle® power system and includes the oil and generator cooling systems and fully enclosed hermetic assembly, as well as controls and diagnostic instrumentation for pressure, temperature, and speed monitoring.

2

THE CONDENSER

A shell and tube heat exchanger in which low pressure vapor is cooled and condensed into a saturated liquid. It is delivered as an integral part of the skid-mounted module, thus reducing installation cost and site-specific engineering.

3

THE EVAPORATOR

or shell and tube heat exchanger which extracts heat from the heat source and transfers it to the organic fluid. This equipment is delivered as an integral part of the skid-mounted module, thus reducing installation cost and site-specific engineering.

4

THE PUMP

it delivers working fluid at the required flow rate and pressure to the evaporator. The pump operates continuously, but at varying speeds to maximize power plant generated power, based on hot resource and cooling tower conditions.

5

THE ELECTRICAL CONTROL SYSTEM (ECS)

contains the system controller, input/output (I/O) modules, working fluid pump motor drive, generator solid-state soft starter, remote monitoring system, system contactors, and relays.

6

THE LOCAL OPERATOR INTERFACE

serves as an interface for the system, providing several functions, including the power indicator, alarm indication and emergency stop.

1

THE TURBINE GENERATOR ASSEMBLY

This is the heart of the PureCycle® power system and includes the oil and generator cooling systems and fully enclosed hermetic assembly, as well as controls and diagnostic instrumentation for pressure, temperature, and speed monitoring.

2

THE CONDENSER

A shell and tube heat exchanger in which low pressure vapor is cooled and condensed into a saturated liquid. It is delivered as an integral part of the skid-mounted module, thus reducing installation cost and site-specific engineering.

3

THE EVAPORATOR

or shell and tube heat exchanger which extracts heat from the heat source and transfers it to the organic fluid. This equipment is delivered as an integral part of the skid-mounted module, thus reducing installation cost and site-specific engineering.

4

THE PUMP

it delivers working fluid at the required flow rate and pressure to the evaporator. The pump operates continuously, but at varying speeds to maximize power plant generated power, based on hot resource and cooling tower conditions.

5

THE ELECTRICAL CONTROL SYSTEM (ECS)

contains the system controller, input/output (I/O) modules, working fluid pump motor drive, generator solid-state soft starter, remote monitoring system, system contactors, and relays.

6

THE LOCAL OPERATOR INTERFACE

serves as an interface for the system, providing several functions, including the power indicator, alarm indication and emergency stop.

Sorry, your ID is maybe not correct (If you did not place any ID that means auto-detect does not work.). And please make sure that your selected element is developed with Swiper.

TICA PureCycle ORC

PureCycle 280 applications

By transforming low-grade waste heat into clean electricity, the TICA PureCycle ORC system can be widely used for renewable energy power generation systems and in industries such as:

steel metallurgy
cement and building materials
chemical, petrochemical and pharma
printing and dyeing, papermaking
thermoelectric applications
I want more info
|

A PureCycle system is a good fit if you need:

1

LOW TEMPERATURE HEAT SOURCE EXPLOITATION

Suitable for low-grade heat from 90°C to 150°C

2

A COMPACT SOLUTION

Low environmental impact

Reduced land occupation

3

FLEXIBLE INSTALLATION

Modular configuration with up to 5 multi-units

Ease of integration in industrial sites and plants

4

FAST TIME TO MARKET

Easy and fast installation

Low-cost foundation

5

SIMPLE OPERATION

No need of operators

Simple and fast maintenance

Low running and maintenance costs

6

A NONFLAMMABLE SOLUTION

No flammable working fluid used

High safety

1

LOW TEMPERATURE HEAT SOURCE EXPLOITATION

Suitable for low-grade heat from 90°C to 150°C

2

A COMPACT SOLUTION

Low environmental impact

Reduced land occupation

3

FLEXIBLE INSTALLATION

Modular configuration with up to 5 multi-units

Ease of integration in industrial sites and plants

4

FAST TIME TO MARKET

Easy and fast installation

Low-cost foundation

5

SIMPLE OPERATION

No need of operators

Simple and fast maintenance

Low running and maintenance costs

6

A NONFLAMMABLE SOLUTION

No flammable working fluid used

High safety

Sorry, your ID is maybe not correct (If you did not place any ID that means auto-detect does not work.). And please make sure that your selected element is developed with Swiper.

Facebook Twitter Youtube Linkedin
Who we are
Technology
Products
Application
Reference
Service
Media
Career
Contact

exergy international srl
cf/vat 03745100127
share capital 5.010.000,00€
company subjected to the direction and coordination of tica-exergy srl

Copyright © 2022 - All rights reserved

This site is registered on wpml.org as a development site.